Mobile bench abrasive belt sander that supports up to 3 internal work groups for a configuration adaptable to the need for finishing. Motorized lifting work table with the possibility of inserting a vacuum system. Fine control piece thickness adjustment +/- 0.1. Alarm diagnostic unit with immediate display of emergencies and faults. Variable feed speed with automatic centering belt. Electronic control of inlet thickness. Dust extraction hoods for each work group

Wet version available for processing materials tending to deformation with heat, equipped with tank with motorized pump for water filtration.

Technical specifications

Working widthmm 650
Abrasive belt sizemm 670 x 2200
Working thickness min/maxmm 0,5/170
Feed speedm/min 0,7-6
Suction hoodmm 120
Suction requiredm³/h 2400
Maximum dimensionsmm 1045 x 1902 x 2090
Approx weightfrom kg 930

WET version

Working widthmm 650
Fixed table heightmm 900
Working thickness min/maxmm 0,5/140

Machine elements

Gruppo operatore
"R" ABRASIVE BELT
Abrasive belt unit with 125 mm diameter contact roller with heat-resistant nitrile rubber with helical groove and standard hardness 55 ° shore. 7.5 kW 1-speed motor with automatic braking. Automatic belt centering system with electronic photocell. Pneumatic belt tensioning system
Gruppo operatore
"X" TOP BRUSHES
Group composed of 8 top quick-change brushes rotating clockwise and counterclockwise simultaneously with transversal movement of the whole group. Motorized and automatic group positioning system according to the program. Brush diameter 115 mm
Gruppo operatore
"B" CYLINDRICAL BRUSH
Group with scotch brite brush diameter 200 mm, manual ascent and descent system with mechanical height indicator, 1 speed motor 3.0 kW and transversal oscillation system. Rotation in both directions possible.
Gruppo operatore
"B4" ROTATING BRUSH GROUP
Rotating carousel group with 4 cylindrical abrasive brushes diameter 300 mm, with rotation of the carousel and of the single brushes, and oscillation of the entire group