Sanding machine for rounding edges GT13 with cross belt system for metal surfaces, with 2 upper and lower work groups for simultaneous processing on the edges of both sides. The two belts have 75 brushes each, easily replaceable and very flexible so as to guarantee perfect machining even inside the holes. The cross belt processing ensures an optimal use of the brush over the entire width of the piece.

Fixed bench with motorized rubber drive rollers at variable speed. Independent motors for each work group for greater control of processing and management of different working pressures. Touch screen control panel with storage of work programs and alarm self-diagnosis. The maintenance of previous surface treatments is guaranteed by not working on the surface of the piece.

Technical specifications

Working widthmm 1300
Strips brushes numbers150
Brush dimensionmm 60 x 50
Working thickness min/maxmm 0,5-90
Feed speedm/min 0,7-6
Suction hoodmm 180
Suction requiredm³/h 4000
Maximum dimensionsmm 2550 x 1250 x 1950
Approx weightfrom kg 2200

Machine elements

Gruppo operatore
"C" STRIPS BRUSHES
Group with two belts with strips brushes for perfect brushing on all edges of the sheet even inside the holes. Motor at a speed 5.5 kW. Motorized and independent pressure regulation from 0 to 35 mm